Library

Forms

How the paper round worksprint, fill in, photograph, upload

Step 1

Print at 100% scale

Single-sided. Only the tests you switched on are printed, so a breaker that needs no FFTK does not carry a blank FFTK page into the field.

Step 2

Fill it in on site

Black or blue pen. The boxes are sized for gloves and the sheet survives a clipboard.

Step 3

Photograph it flat

Good light, whole sheet in frame. A phone on a panel door is enough; no scanner.

Step 4

Upload through Scan

Open that asset’s form and use its Scan button. Every value lands in its own field, and you confirm before anything saves.

each one prints exactly the form it opens, so paper and screen cannot drift

LV Circuit BreakerNameplate, visual, IR & contact resistance, trip unit, FFTK trip tests Print blank

MV Circuit BreakerVacuum breaker inspection, coils, IR & contact resistance Print blank

Switchboard / MCCInspection, insulation resistance, bus connection resistance, fused disconnects Print blank

Power TransformerNameplate, visual, turns ratio, PF/oil, functional tests Print blank

Cable SystemCable runs with per-conductor Megger readings (10 rows) Print blank

Multifunction RelaySettings, visual inspection, test results Print blank

Overcurrent RelayVisual inspection, insulation resistance, comments Print blank

MotorNameplate and test readings Print blank

Station BatteryBank details and cell readings Print blank

Bus Duct / BuswayInspection and resistance readings Print blank

Current TransformerNameplate, ratio and IR readings Print blank

Vacuum ContactorInspection, coils, IR & contact resistance Print blank

HVL/cc Visi-Vac SwitchInspection, coils, IR, contacts & dielectric Print blank

Infrared SurveySurvey areas, load conditions, per-connection phase temperatures Print blank

Relay Functional CheckRelay settings from the relay or its .rdb, trip settings tested, targets, outputs and trip checks Print blank